What do TCP retransmissions mean?
A retransmission is TCP resending data that wasn't acknowledged in time, usually because a packet was lost. A few are normal on any network. A steady rate above about 1–5% of data packets slows connections down and points at loss on the network path.
What it looks like in the packets
- Wireshark marks resent segments as retransmissions or fast retransmissions.
- Duplicate ACKs from the receiver often come first: it's asking again for the missing data.
- Throughput drops while TCP waits and backs off.
Common causes
- Congestion on a busy link or Wi-Fi interference.
- A faulty cable, port, or duplex mismatch.
- An overloaded router, firewall, or VPN.
- Packets reordered on the path (they can look like losses).
What to check
- See whether retransmissions cluster on one server, one link, or one time window.
- Compare wired and Wi-Fi, and check interface error counters on switches and routers.
- Capture closer to each end to find which side of the path loses packets.
Wireshark display filters
tcp.analysis.retransmission || tcp.analysis.fast_retransmissiontcp.analysis.duplicate_ack
How Blame Finder flags it
Warning at 5% or more of data packets and at least 20 resends; Low at 1% or more. Upload a capture and the finding links straight to the packets behind it, with the most likely culprit at the top.