Learn / Answers

What causes bad call quality? Jitter, packet loss, and MOS

Voice calls send a small audio packet every 20 ms. Lost packets cause dropouts and robotic sound; jitter, packets arriving unevenly, causes choppy audio. Loss of 1% is noticeable and 5% is bad; jitter above about 30 ms starts to hurt. MOS rates quality from 1 to 5, and above 4 sounds good.

What it looks like in the packets

  • RTP audio streams, one per direction, identified by SSRC.
  • Gaps in RTP sequence numbers (lost packets).
  • Uneven arrival times compared with RTP timestamps (jitter).

Common causes

  • A busy uplink or Wi-Fi with no quality-of-service for voice.
  • A VPN or long path adding delay variation.
  • Interference or weak Wi-Fi signal.
  • An overloaded router or firewall.

What to check

  1. Check which direction loses audio: it tells you which side of the path is the problem.
  2. Prioritise voice traffic (QoS/DSCP) on the router.
  3. Test on a wired connection to rule out Wi-Fi.

Wireshark display filters

  • rtpall audio packets
  • sipcall setup messages

How Blame Finder flags it

Loss: Warning at 1% or more, High at 5%. Jitter: Warning at 30 ms or more, High at 60 ms. Upload a capture and the finding links straight to the packets behind it, with the most likely culprit at the top.