Learn / Field guide

ARP: finding devices on the local network

Before a device can send a packet to another device on the same network, it needs that device's hardware (MAC) address. ARP asks "who has this IP address?" and the owner answers.

9 ARP fields, explained

Field names are the ones Wireshark and TShark use, so you can search for them or use them in display filters.

arp.opcode

Whether this is a question (request) or an answer (reply).

Why it matters: ARP is how a device finds the hardware address that owns an IP address on the local network.

arp.src.hw_mac

The hardware address of the device sending this ARP message.

arp.src.proto_ipv4

The IP address of the device sending this ARP message.

arp.dst.hw_mac

The hardware address being asked about. In a request it's all zeros because it's unknown.

arp.dst.proto_ipv4

The IP address whose owner is being looked for.

arp.hw.type

The kind of network hardware, almost always Ethernet.

arp.proto.type

The kind of address being resolved, almost always IPv4.

arp.hw.size

The length of a hardware address: 6 bytes for Ethernet.

arp.proto.size

The length of a protocol address: 4 bytes for IPv4.