Ethernet: frames on the local network
Ethernet frames carry packets between devices on the same local network, addressed by MAC address. Wi-Fi captures usually appear as Ethernet too.
6 Ethernet fields, explained
eth.dst-
The hardware (MAC) address of the next device on the local network that should receive this frame.
Why it matters: For traffic to the internet, this is usually your router, not the final destination.
eth.src-
The hardware (MAC) address of the device that put this frame on the wire.
Why it matters: MAC addresses only matter on the local network; routers replace them at every hop.
eth.type-
Says what's inside the frame, such as IPv4 (0x0800) or ARP (0x0806).
Why it matters: The receiver uses it to decide which protocol should read the rest.
eth.stream-
A number Wireshark gives each pair of hardware addresses talking to each other.
Why it matters: Useful for filtering; it isn't sent on the network.
eth.lg-
Whether the hardware address was assigned by the manufacturer or set locally.
Why it matters: Phones and laptops often use locally set, randomized addresses for privacy.
eth.ig-
Whether the address belongs to one device or to a group (multicast or broadcast).